The Aroma of CHULUX Coffee

1 Powerful Steam Wand 2 Single & Double Shots 3 Removable Water Tank 4 Cup Warming Plate
How to Use the Milk Frother?
1. Press the Steam button to enter steam mode, turn knob to ON 3s for release cooled water droplets in the wand.
2. Press the Steam button again, place whole milk under the steam wand then turn knob to ON.
3. When the desired temp or milk foam is reached, turn knob to OFF.
4. Use wet cloth to wipe and push back the steam wand, then turn again to ON 3s for release any milk left in the wand.
How to Adjust the Coffee Amount?
1. Ensure the espresso machine is started and preheated (When light is not blinking).
2. Press and hold 3-5 seconds the Single or Double cup button you want to adjust.
3. When it reached your desired amount, press the Single or Double cup button again.
Reset the default amount: Turn off the machine, but not to unplug. Then press and hold the Single Cup and Steam button 3-5 seconds.
How to Perfectly Use Portafilter and Spoon?
1. Align the notch in the portafilter with the protrusion in the filter, then insert and gently twist to secure it in place.
2. Fill the single or double filter with 1 or 2 flat scoops of coffee grounds, then use the other end to tamp the grounds.
3. When disposing of coffee grounds after extraction, flip up the small black piece on the portafilter to prevent the filter from dislodging.
4. Twist again to align the protrusion with the notch, facilitating you to remove the filter.
How to Descale the Espresso Machine?
1. Pour 400ml of pre-made descaling water into the reservoir. Press the Single cup button once and use knob to release about 100ml of hot descaling water.
2. Wait for 30 mins, then finish 3 times with the Double cup brewing process.
3. Pour 400ml of clean water into the reservoir. Finish 3 times with the Double cup brewing process again and release about 200ml of hot clean water.
4. To cancel the descaling warning, press and hold the three buttons (excluding the Power) simultaneously for 3-5s.
How to Get Better Pressure?
· If the pressure is too low, you can try using a finer coffee grind, adding more coffee grounds to the filter, or increasing the tamping pressure.
· Using finer coffee grounds increases resistance, potentially enhancing water pressure. Adding more coffee grounds to the filter increases the density of the coffee puck, also contributing to higher water resistance.
· Conversely, if the pressure is too high, consider reducing the amount of coffee grounds or lowering the tamping pressure.

1 Product Component 2 Sleek Compact Design 3 2 in 1 Portafilter 4 Detachable Drip Tray

Note: Insufficient coffee grounds, too coarse grind, and poor tamping will all result in inadequate pressure, preventing the brewing of the ideal espresso. The volume of espresso will vary depending on the amount of coffee grounds and the different grind levels.
Why is there water inside the Milk Steam Wand when I just received the product?
Don't worry, it's just clear water from steam and release water tests during the quality control period.
We suggest refer to the "Before First Use" in User's Manual to make a clean.
If you have any trouble, please feel free to contact for help.
Why does the light keep blinking after I press the ON button?
This means the espresso machine is preheating and will last about 30s.
If blinking has timed out, please check water tank is installed correctly and ensure it has water inside.
And if the issue persists, please do not hesitate to contact for help.
Why the machine doesn't work after I use the steam function and the two button light keep flashing?
It indicates the over-heating protection program is triggered and the machine requires cooling.
Solution: Turning the knob in hot water mode, then release the hot water for about 20s and turn off, the internal boiler will cool down quickly.
Is there some tips for making milk foam?
Use cold whole milk or the fat content >3.5% milk to get foam better.
When steaming, keep the head of the steam wand no more than half covered, place on the sides of milk jug but not in center, and make the angle with the surface of the milk 30-60°.
Why does the machine make 'beep' sound and all buttons flashing after pressing the power button?
This happens when the side knob is set to 'ON'.
Just turn it to 'OFF' and press the Power button again, then the machine will stop beeping and work normally.